$199.99
Looking for a Dodge Hellcat intake with massive gains? Look no further! Our Precision Hellcat intake is packed with quality, visuals & dyno-proven results. We took our R&D to the...
Looking for a Dodge Hellcat intake with massive gains? Look no further! Our Precision Hellcat intake is packed with quality, visuals & dyno-proven results. We took our R&D to the...

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

Availability: 27 In Stock
Sku: CPS-CBI-HC-17-22-BLK
Categories: Home pageIntakesNEW ItemsNon-Turbo
Vendor: Cornerstone Performance Solutions

Intake Clip


Looking for a Dodge Hellcat intake with massive gains?

Look no further! Our Precision Hellcat intake is packed with quality, visuals & dyno-proven results. We took our R&D to the literal drawing board and looked to maximize every aspect of the stock intake. We took our scans and used every cm of available space to create a stunning and purposeful airbox that looks great and outperforms the stock & other aftermarket intakes without reducing flow. Then we added a 4.5" mandrel bent intake tube for as little restriction as possible. Then we styled it with a laser-cut Cornerstone Performance Solutions logo and powder-coated it to give a long-lasting and immaculate finish. This intake is not slapped together by any means, this is the result of months of R&D & design, Enjoy!

Features & Benefits of the Closed Box Cornerstone Performance Solutions Cold Air Intake for the 17-22 Hellcat

  • 4.5" mandrel bent intake tube
  • NO TUNING REQUIRED
  • No Cutting or Modifications for Installation
  • Uses factory mounting locations
  • 7" Oiled filter (30% greater surface area than stock)
  • Retains the factory fresh-air (Ram Air) inlet from the front grille/headlight
  • Powder-Coated with Prismatic Powders premium powder coat
  • 100% Designed, Fabricated & Finished in the U.S.A.
  • Average installation time of 30 minutes
  • 19+ HP Gain over stock (Dyno Proven)
  • 10+ FTLB Gain over stock (Dyno Proven)
  • Kit includes hardware for both PCV system configurations
  • Laser-cut closed box enclosures
  • High-Quality silicone boot & Hardware
  • Limited Lifetime Warranty on all hard parts

What is included in the Closed Box Cold Air Intake for the 17-22 Hellcat from Cornerstone?

  • 1x - Powder-Coated intake tube w/ provisions
  • 1x - Custom 7" Oiled Filter
  • 1x - Assembled & Powder-Coated Intake Box w/ Lid
  • 1x - High-Quality Reinforced 4-Ply Silicone boot
  • 1x - Short PCV hose
  • 1x - Long PCV hose
  • 2x - 4.5" Stainless Steel T-Bolt Clamps
  • 2x - Stainless Steel Worm Gear Clamps for PCV hose

Dyno Test Results for our Closed Box Cold Air Intake for the 17-22 Hellcat

All testing was performed on a stock 2020 Dodge Hellcat Charger Widebody with zero other modifications. Testing was performed in a climate-controlled facility on the same day with the only changes being adding our aftermarket hellcat intake to the car. Stock results- 4 Runs back to back yielded us a maximum of 632WHP and 674FTLBS Results with our intake added

4 Runs back to back yielded us a maximum of 651WHP and 684FTLBS. A 19WHP & 10FTLBS GAIN!!!

We noticed during our testing that the stock hellcat intake run after run got heat-soaked really bad and took quite some time to recover back to our original starting point which was 110 degrees. We tried everything we could to try and heat soak our intake run after run to try and replicate the heat gains we saw with the stock airbox and couldn't.

NOTE: May require a custom tune to receive maximum performance gains.

Looking for a Dodge Hellcat intake with massive gains?

Look no further! Our Precision Hellcat intake is packed with quality, visuals & dyno-proven results. We took our R&D to the literal drawing board and looked to maximize every aspect of the stock intake. We took our scans and used every cm of available space to create a stunning and purposeful airbox that looks great and outperforms the stock & other aftermarket intakes without reducing flow. Then we added a 4.5" mandrel bent intake tube for as little restriction as possible. Then we styled it with a laser-cut Cornerstone Performance Solutions logo and powder-coated it to give a long-lasting and immaculate finish. This intake is not slapped together by any means, this is the result of months of R&D & design, Enjoy!

Features & Benefits of the Closed Box Cornerstone Performance Solutions Cold Air Intake for the 17-22 Hellcat

  • 4.5" mandrel bent intake tube
  • NO TUNING REQUIRED
  • No Cutting or Modifications for Installation
  • Uses factory mounting locations
  • 7" Oiled filter (30% greater surface area than stock)
  • Retains the factory fresh-air (Ram Air) inlet from the front grille/headlight
  • Powder-Coated with Prismatic Powders premium powder coat
  • 100% Designed, Fabricated & Finished in the U.S.A.
  • Average installation time of 30 minutes
  • 19+ HP Gain over stock (Dyno Proven)
  • 10+ FTLB Gain over stock (Dyno Proven)
  • Kit includes hardware for both PCV system configurations
  • Laser-cut closed box enclosures
  • High-Quality silicone boot & Hardware
  • Limited Lifetime Warranty on all hard parts

What is included in the Closed Box Cold Air Intake for the 17-22 Hellcat from Cornerstone?

  • 1x - Powder-Coated intake tube w/ provisions
  • 1x - Custom 7" Oiled Filter
  • 1x - Assembled & Powder-Coated Intake Box w/ Lid
  • 1x - High-Quality Reinforced 4-Ply Silicone boot
  • 1x - Short PCV hose
  • 1x - Long PCV hose
  • 2x - 4.5" Stainless Steel T-Bolt Clamps
  • 2x - Stainless Steel Worm Gear Clamps for PCV hose

Dyno Test Results for our Closed Box Cold Air Intake for the 17-22 Hellcat

All testing was performed on a stock 2020 Dodge Hellcat Charger Widebody with zero other modifications. Testing was performed in a climate-controlled facility on the same day with the only changes being adding our aftermarket hellcat intake to the car. Stock results- 4 Runs back to back yielded us a maximum of 632WHP and 674FTLBS Results with our intake added

4 Runs back to back yielded us a maximum of 651WHP and 684FTLBS. A 19WHP & 10FTLBS GAIN!!!

We noticed during our testing that the stock hellcat intake run after run got heat-soaked really bad and took quite some time to recover back to our original starting point which was 110 degrees. We tried everything we could to try and heat soak our intake run after run to try and replicate the heat gains we saw with the stock airbox and couldn't.

NOTE: May require a custom tune to receive maximum performance gains.

Shipping Policy

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, most items will ship within 1-2 business days, unless otherwise noted in the product listing. Special Orders lead times (i.e. time to ship) will be discussed over the phone with the customer.

Any orders over $99 ships free* to the contiguous 48 states (excluding Alaska and Hawaii). Orders receiving free shipping will be shipped via ground. International and  orders requiring freight shipping do NOT qualify for free shipping.

*Note: Any item requiring freight shipping does not qualify for Free Shipping. 

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). You should expect to receive your refund within 24-48 hours of us receiving your return.

NOTE: Original costs of shipping the item to you will NOT be refunded.

Please keep in mind the transit time for us to receive your return from the shipper (5 to 10 business days) and the time it takes your bank to process our refund request (5 to 10 business days).

Once we receive your return request, we will respond quickly with a status update, RMA (Return Merchandise Authorization) number, and  instructions for how to return items from your order. You may also find the instructions for returning items as follows:

  • Place, secure, and seal the item and any instructions, warranty, or other documents in its original packaging & box
  • Place the original product, within its box, inside another box
  • Use a black Sharpie, or other distinctive, bold pen, to write your RMA number on the outermost of the box (e.g. "RMA# 567)
  • Take the box to the shipper of your choice
  • Please retain a copy of your shipping receipt and tracking number

Once we receive the item, we will issue a refund to your original method of payment within 24-48 hours.

Under certain circumstances, an item will NOT be refunded. These circumstances include, but are not limited to:

  • Product has been installed or otherwise modified/used
  • Product is shipped without it's original packaging, installation hardware, or documents
  • The RMA number was not written on the outermost box

NOTE: The customer is responsible for the return shipping costs.

Shipping Policy

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, most items will ship within 1-2 business days, unless otherwise noted in the product listing. Special Orders lead times (i.e. time to ship) will be discussed over the phone with the customer.

Any orders over $99 ships free* to the contiguous 48 states (excluding Alaska and Hawaii). Orders receiving free shipping will be shipped via ground. International and  orders requiring freight shipping do NOT qualify for free shipping.

*Note: Any item requiring freight shipping does not qualify for Free Shipping. 

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). You should expect to receive your refund within 24-48 hours of us receiving your return.

NOTE: Original costs of shipping the item to you will NOT be refunded.

Please keep in mind the transit time for us to receive your return from the shipper (5 to 10 business days) and the time it takes your bank to process our refund request (5 to 10 business days).

Once we receive your return request, we will respond quickly with a status update, RMA (Return Merchandise Authorization) number, and  instructions for how to return items from your order. You may also find the instructions for returning items as follows:

  • Place, secure, and seal the item and any instructions, warranty, or other documents in its original packaging & box
  • Place the original product, within its box, inside another box
  • Use a black Sharpie, or other distinctive, bold pen, to write your RMA number on the outermost of the box (e.g. "RMA# 567)
  • Take the box to the shipper of your choice
  • Please retain a copy of your shipping receipt and tracking number

Once we receive the item, we will issue a refund to your original method of payment within 24-48 hours.

Under certain circumstances, an item will NOT be refunded. These circumstances include, but are not limited to:

  • Product has been installed or otherwise modified/used
  • Product is shipped without it's original packaging, installation hardware, or documents
  • The RMA number was not written on the outermost box

NOTE: The customer is responsible for the return shipping costs.