Looking to Twin Turbo your Hellcat or Scatpack?

If you're trying to make big power and run that number at the dragstrip or have a fun street car then look no further! We took our R&D to the literal drawing board and looked to maximize every aspect of the Mopar platform. A true bolt on twin turbo kit for the Hellcat, Scatpack market WITHOUT running it through the supercharger. We developed a 100% billet intake manifold with a built-in air/water intercooler in it that will come STANDARD with all of the kits. We started the kit by developing a billet stainless flange to mate/seal to the factory manifolds(we have made 1400+whp through them) because doing headers on these cars is not fun as you may know. The hotside is made out of 2.5" 304 Stainless that will come ceramic coated. Exhaust will connect right to the factory Cat-back or any aftermarket exhaust. Cold side piping is also made out of 2.5" 304 stainless that transitions to a 4" pipe to "fill" the engine bay all of the way to the throttle body.

Example- The stock hellcat supercharger makes around 630-640whp at 12PSI of boost. On this twin turbo setup we made 915whp on 10PSI. Way less restriction, lower IAT's and reduced strain on the drivetrain. At 17PSI we made 1162WHP & 1073 Ft-Lbs.

Features & Benefits of the Twin Turbo Kit from Cornerstone Performance

1800+WHP Capable depending on turbo size
915WHP & 845 Ft-Lbs at just 10PSI
1162WHP & 1073 Ft-Lbs at just 17PSI
Controllable boost levels at the touch of a button
30*- Intake air temps over ambient supercharger temps
No more battling intake heat issues
Retains all factory sensors
Retains factory cooling system
100% Designed, Fabricated & Finished in the U.S.A.
Kit includes all hardware

What is included in the Twin Turbo Kit from Cornerstone Performance?

Billet intake manifold (w/air/water intercooler w/16ORB ports)
Billet fuel rails (-10an ports)
304SS Hotside pipes with Billet stainless flanges
304SS Coldside (Powdercoated black)
34SS 3" Exhaust
2x Dual ceramic ball bearing turbos (Choice of 62mm or 68mm)
Exa-pump Scavenge pump (w/ custom bracket with wiring )
Billet oil drains
Braided stainless feed lines
Turbosmart Wastegates
Turbosmart Blow-off Valve
Screw in IAT sensor
Wideband sensor extensions
Boots & Stainless T-bolt clamps
Air filters / Screens depending on turbo size

This will be a 100% True bolt on style kit. No cutting, welding, fabrication of any kind is needed. All AN lines will come pre made to correct length.

Dodge Charger/Challenger Hellcat/Scatpack Twin Turbo Kit Dodge Charger/Challenger Hellcat/Scatpack Twin Turbo Kit