You have no items in your shopping cart.
Exhaust Clip
Intake Clip
Cornerstone Performance Stage 6 Hellcat/Redeye/Demon Kit
This stage 6 package for the Dodge Hellcat platform is everything you loved in our stage 5 for power, engine sound, and maintenance but we changed out the exhaust to a catted version to give you a more tame but still noticeable difference in exhaust note.
This package includes
- Cornerstone Catted Midpipes- CPS-MPK-6264-CC-CATS
- JLT Intake- CAI-HC-15
- JLT Catch Can- 3060P-B
- Mishimoto Thermostat- misMMTS-JED-06L
- Cornerstone Catback-
- RIPA TUNED Incognito Pulley-
Cornerstone Catted Midpipes
We know that not everyone loves an exhaust so loud that you can't escape it. This is why Cornerstone Performance Solutions has made the Catted Midpipe version. This will give you better flow, high-flow cats, and still a better exhaust note. You can rest knowing that with our stage 6 kit you won't be leaving things on the table just because you are wanting that little bit of a more tame exhaust note.
JLT Intake
This kit includes a fully Roto Molded airbox that uses the factory fresh air inlet from the grill/headlight that also retains the factory method and seals to the hood. This is the key component that puts the JLT kit well above the rest. This specific design helps keep inlet air temps down by blocking the filter from hot engine heat. This JLT intake was chosen to match perfectly with the higher demand of air with the additional boost that we are trying to push out of that powerhouse under the hood.
JLT Catch Can
Engine sludge build-up reduces performance and shortens engine life. This JLT Catch Can is designed to counter this by providing a highly efficient filter connected to the Charger’s Positive Crankcase Ventilation (PCV) system. It features a multi-stage filter that dramatically reduces the sludge build-up. JLT combines all of this with a 3oz capacity so when you forget to get that drained you won't have to worry. We recommend draining this catch can roughly every 2000 miles and you won't ever have to worry because of the large capacity.
Mishimoto Thermostat
The Mishimoto racing thermostats promote greater cooling efficiency by significantly decreasing high engine temperatures. Now just because we said race doesn't mean this is a race-only application! This is a product that is race-inspired because of the features and overall function of the Mishimoto Thermostat, especially on these Dodge powerhouses. Once the engine is fully warmed up, the Mishimoto low-temperature racing thermostat will open at a lower temperature (180°F) compared to standard thermostats (203°F). This allows the coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures. Keeping the cooling system working as efficiently as possible is more important than we could explain especially when working to get the most potential out of your ride like we are with this package.
Cornerstone Dodge Charger and Challenger Catback
This Cat back is a wonderful piece of engineering. Featuring a better flowing exhaust that can make sure you have the best overall sound and flow of your already everyday monster. When paired with our Catted Midpipe you will be able to have good flow from front to back but have an exhaust system that will only accent the flow and won't cause you to have a massively different exhaust noise level.
RIPA TUNED Incognito Pulley
The Ripa Tuned Incognito Pully for the Dodge Hellcat/Redeye/Demon is like magic. You wish you understood but it just works. This pulley can bring you upwards of 100 Horsepower additional, especially when paired with the rest of the parts in this Stage 6 Kit. This pully can be easily installed in the driveway in a few hours and is easily removed and put back to stock if you ever wanted or needed to.
Hellcat/Redeye/Demon Stage 6 Cliff notes!
This Stage 6 package for the Dodge Hellcat/Redeye/Demon is a great option when you want to make some serious power without diving in real deep. When combining all of these engine parts with our catted midpipes you are able to get an increase in power while still being able to hear that radio under a full-throttle pull.
Special Note
* This kit requires no additional tuning but to get the most out of your modifications we do recommend seeking a reputable tuner.*
Cornerstone Performance Stage 6 Hellcat/Redeye/Demon Kit
This stage 6 package for the Dodge Hellcat platform is everything you loved in our stage 5 for power, engine sound, and maintenance but we changed out the exhaust to a catted version to give you a more tame but still noticeable difference in exhaust note.
This package includes
- Cornerstone Catted Midpipes- CPS-MPK-6264-CC-CATS
- JLT Intake- CAI-HC-15
- JLT Catch Can- 3060P-B
- Mishimoto Thermostat- misMMTS-JED-06L
- Cornerstone Catback-
- RIPA TUNED Incognito Pulley-
Cornerstone Catted Midpipes
We know that not everyone loves an exhaust so loud that you can't escape it. This is why Cornerstone Performance Solutions has made the Catted Midpipe version. This will give you better flow, high-flow cats, and still a better exhaust note. You can rest knowing that with our stage 6 kit you won't be leaving things on the table just because you are wanting that little bit of a more tame exhaust note.
JLT Intake
This kit includes a fully Roto Molded airbox that uses the factory fresh air inlet from the grill/headlight that also retains the factory method and seals to the hood. This is the key component that puts the JLT kit well above the rest. This specific design helps keep inlet air temps down by blocking the filter from hot engine heat. This JLT intake was chosen to match perfectly with the higher demand of air with the additional boost that we are trying to push out of that powerhouse under the hood.
JLT Catch Can
Engine sludge build-up reduces performance and shortens engine life. This JLT Catch Can is designed to counter this by providing a highly efficient filter connected to the Charger’s Positive Crankcase Ventilation (PCV) system. It features a multi-stage filter that dramatically reduces the sludge build-up. JLT combines all of this with a 3oz capacity so when you forget to get that drained you won't have to worry. We recommend draining this catch can roughly every 2000 miles and you won't ever have to worry because of the large capacity.
Mishimoto Thermostat
The Mishimoto racing thermostats promote greater cooling efficiency by significantly decreasing high engine temperatures. Now just because we said race doesn't mean this is a race-only application! This is a product that is race-inspired because of the features and overall function of the Mishimoto Thermostat, especially on these Dodge powerhouses. Once the engine is fully warmed up, the Mishimoto low-temperature racing thermostat will open at a lower temperature (180°F) compared to standard thermostats (203°F). This allows the coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures. Keeping the cooling system working as efficiently as possible is more important than we could explain especially when working to get the most potential out of your ride like we are with this package.
Cornerstone Dodge Charger and Challenger Catback
This Cat back is a wonderful piece of engineering. Featuring a better flowing exhaust that can make sure you have the best overall sound and flow of your already everyday monster. When paired with our Catted Midpipe you will be able to have good flow from front to back but have an exhaust system that will only accent the flow and won't cause you to have a massively different exhaust noise level.
RIPA TUNED Incognito Pulley
The Ripa Tuned Incognito Pully for the Dodge Hellcat/Redeye/Demon is like magic. You wish you understood but it just works. This pulley can bring you upwards of 100 Horsepower additional, especially when paired with the rest of the parts in this Stage 6 Kit. This pully can be easily installed in the driveway in a few hours and is easily removed and put back to stock if you ever wanted or needed to.
Hellcat/Redeye/Demon Stage 6 Cliff notes!
This Stage 6 package for the Dodge Hellcat/Redeye/Demon is a great option when you want to make some serious power without diving in real deep. When combining all of these engine parts with our catted midpipes you are able to get an increase in power while still being able to hear that radio under a full-throttle pull.
Special Note
* This kit requires no additional tuning but to get the most out of your modifications we do recommend seeking a reputable tuner.*
Shipping Policy
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, most items will ship within 1-2 business days, unless otherwise noted in the product listing. Special Orders lead times (i.e. time to ship) will be discussed over the phone with the customer.
Any orders over $99 ships free* to the contiguous 48 states (excluding Alaska and Hawaii). Orders receiving free shipping will be shipped via ground. International and orders requiring freight shipping do NOT qualify for free shipping.
*Note: Any item requiring freight shipping does not qualify for Free Shipping.
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). You should expect to receive your refund within 24-48 hours of us receiving your return.
NOTE: Original costs of shipping the item to you will NOT be refunded.
Please keep in mind the transit time for us to receive your return from the shipper (5 to 10 business days) and the time it takes your bank to process our refund request (5 to 10 business days).
Once we receive your return request, we will respond quickly with a status update, RMA (Return Merchandise Authorization) number, and instructions for how to return items from your order. You may also find the instructions for returning items as follows:
- Place, secure, and seal the item and any instructions, warranty, or other documents in its original packaging & box
- Place the original product, within its box, inside another box
- Use a black Sharpie, or other distinctive, bold pen, to write your RMA number on the outermost of the box (e.g. "RMA# 567)
- Take the box to the shipper of your choice
- Please retain a copy of your shipping receipt and tracking number
Once we receive the item, we will issue a refund to your original method of payment within 24-48 hours.
Under certain circumstances, an item will NOT be refunded. These circumstances include, but are not limited to:
- Product has been installed or otherwise modified/used
- Product is shipped without it's original packaging, installation hardware, or documents
- The RMA number was not written on the outermost box
NOTE: The customer is responsible for the return shipping costs.
Shipping Policy
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, most items will ship within 1-2 business days, unless otherwise noted in the product listing. Special Orders lead times (i.e. time to ship) will be discussed over the phone with the customer.
Any orders over $99 ships free* to the contiguous 48 states (excluding Alaska and Hawaii). Orders receiving free shipping will be shipped via ground. International and orders requiring freight shipping do NOT qualify for free shipping.
*Note: Any item requiring freight shipping does not qualify for Free Shipping.
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). You should expect to receive your refund within 24-48 hours of us receiving your return.
NOTE: Original costs of shipping the item to you will NOT be refunded.
Please keep in mind the transit time for us to receive your return from the shipper (5 to 10 business days) and the time it takes your bank to process our refund request (5 to 10 business days).
Once we receive your return request, we will respond quickly with a status update, RMA (Return Merchandise Authorization) number, and instructions for how to return items from your order. You may also find the instructions for returning items as follows:
- Place, secure, and seal the item and any instructions, warranty, or other documents in its original packaging & box
- Place the original product, within its box, inside another box
- Use a black Sharpie, or other distinctive, bold pen, to write your RMA number on the outermost of the box (e.g. "RMA# 567)
- Take the box to the shipper of your choice
- Please retain a copy of your shipping receipt and tracking number
Once we receive the item, we will issue a refund to your original method of payment within 24-48 hours.
Under certain circumstances, an item will NOT be refunded. These circumstances include, but are not limited to:
- Product has been installed or otherwise modified/used
- Product is shipped without it's original packaging, installation hardware, or documents
- The RMA number was not written on the outermost box
NOTE: The customer is responsible for the return shipping costs.