$857.99
$789.99
Cornerstone Performance Solutions is proud to present our Dodge Challenger and Charger Lease package bundle kit! This kit fits the 2015-current 6.2 and 6.4 Liters! This is the perfect package...
Cornerstone Performance Solutions is proud to present our Dodge Challenger and Charger Lease package bundle kit! This kit fits the 2015-current 6.2 and 6.4 Liters! This is the perfect package...

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

Availability: 2 In Stock
Sku: KIT-DODGE-CHARGER-LEASE
Vendor: Cornerstone Performance Solutions

Exhaust Clip


Intake Clip



Cornerstone Performance Solutions is proud to present our Dodge Challenger and Charger Lease package bundle kit! This kit fits the 2015-current 6.2 and 6.4 Liters! This is the perfect package for the "lease" in your life. With tasteful mods that will bring out the forgotten power that was left on the table. Let us get that Dodge 6.2 or 6.4L sounding and running like it should have been.

This bundle kit comes ready with some awesome parts and features the following parts all in one awesome package!

  1. Cornerstone Midpipes- CPS-MPK-6264-CC
  2. JLT Catch Can- jlt3063P-B
  3. JLT Intake- jltCAI2-DH64-11

Cornerstone Midpipes

This Stainless Midpipe System fits the 2015-current 6.2L & 6.4L Hemi and comes with all the hardware needed for a drill-less installation. These 3" pipes feature smooth mandrel bends for increased exhaust flow and is designed to bolt up to your stock exhaust manifolds, thus maintaining the factory connection point in front of the X-Pipe. This system is made of stainless steel and is proudly manufactured in the USA!

 

JLT Catch Can

  • 3oz Capacity
  • Solid billet construction.
  • OEM Style quick connect PCV fittings
  • Multi-stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake.

 
During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors, intake tube, intake manifold runners and even dilute your gas, lowering its octane level this means you can not only be leaving power on the table but also hurting your engine. Milled from solid billet aluminum this is a rock-solid piece that not only does its job but looks great while it does it. The JLT catch can features a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks. The hold of the catch can holds 3 oz of fluid, while that may not sound like a lot, you shouldn’t see that much oil in your PCV system. Drain it every 2000-3000 miles and you will never come close to filling it.

 

JLT Intake

The JLT intake that comes in the kit includes a fully Roto Molded airbox that has an opening in the front to grab fresh air from the grille/headlight area and also seals to the hood. This is done to provide the best air possible that then gives the best performance possible.

The filter that is used in the JLT intake is a custom-built design made by S&B. It has a built-in bell mouth for super smooth and fast airflow as well as huge 1 inch deep pleats that allow for more surface area than filters that look much bigger.

The intake tube is roto-molded plastic with a huge 5" filer opening for superior airflow. With a mouth that is 4 inches at the throttle body end, it is ready for any larger throttle bodies that may come in the future.

 

 

Special Note

* This kit requires no additional tuning but to get the most out of your modifications we do recommend seeking a reputable tuner.*

Cornerstone Performance Solutions is proud to present our Dodge Challenger and Charger Lease package bundle kit! This kit fits the 2015-current 6.2 and 6.4 Liters! This is the perfect package for the "lease" in your life. With tasteful mods that will bring out the forgotten power that was left on the table. Let us get that Dodge 6.2 or 6.4L sounding and running like it should have been.

This bundle kit comes ready with some awesome parts and features the following parts all in one awesome package!

  1. Cornerstone Midpipes- CPS-MPK-6264-CC
  2. JLT Catch Can- jlt3063P-B
  3. JLT Intake- jltCAI2-DH64-11

Cornerstone Midpipes

This Stainless Midpipe System fits the 2015-current 6.2L & 6.4L Hemi and comes with all the hardware needed for a drill-less installation. These 3" pipes feature smooth mandrel bends for increased exhaust flow and is designed to bolt up to your stock exhaust manifolds, thus maintaining the factory connection point in front of the X-Pipe. This system is made of stainless steel and is proudly manufactured in the USA!

 

JLT Catch Can

  • 3oz Capacity
  • Solid billet construction.
  • OEM Style quick connect PCV fittings
  • Multi-stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake.

 
During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors, intake tube, intake manifold runners and even dilute your gas, lowering its octane level this means you can not only be leaving power on the table but also hurting your engine. Milled from solid billet aluminum this is a rock-solid piece that not only does its job but looks great while it does it. The JLT catch can features a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks. The hold of the catch can holds 3 oz of fluid, while that may not sound like a lot, you shouldn’t see that much oil in your PCV system. Drain it every 2000-3000 miles and you will never come close to filling it.

 

JLT Intake

The JLT intake that comes in the kit includes a fully Roto Molded airbox that has an opening in the front to grab fresh air from the grille/headlight area and also seals to the hood. This is done to provide the best air possible that then gives the best performance possible.

The filter that is used in the JLT intake is a custom-built design made by S&B. It has a built-in bell mouth for super smooth and fast airflow as well as huge 1 inch deep pleats that allow for more surface area than filters that look much bigger.

The intake tube is roto-molded plastic with a huge 5" filer opening for superior airflow. With a mouth that is 4 inches at the throttle body end, it is ready for any larger throttle bodies that may come in the future.

 

 

Special Note

* This kit requires no additional tuning but to get the most out of your modifications we do recommend seeking a reputable tuner.*

Shipping Policy

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, most items will ship within 1-2 business days, unless otherwise noted in the product listing. Special Orders lead times (i.e. time to ship) will be discussed over the phone with the customer.

Any orders over $99 ships free* to the contiguous 48 states (excluding Alaska and Hawaii). Orders receiving free shipping will be shipped via ground. International and  orders requiring freight shipping do NOT qualify for free shipping.

*Note: Any item requiring freight shipping does not qualify for Free Shipping. 

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). You should expect to receive your refund within 24-48 hours of us receiving your return.

NOTE: Original costs of shipping the item to you will NOT be refunded.

Please keep in mind the transit time for us to receive your return from the shipper (5 to 10 business days) and the time it takes your bank to process our refund request (5 to 10 business days).

Once we receive your return request, we will respond quickly with a status update, RMA (Return Merchandise Authorization) number, and  instructions for how to return items from your order. You may also find the instructions for returning items as follows:

  • Place, secure, and seal the item and any instructions, warranty, or other documents in its original packaging & box
  • Place the original product, within its box, inside another box
  • Use a black Sharpie, or other distinctive, bold pen, to write your RMA number on the outermost of the box (e.g. "RMA# 567)
  • Take the box to the shipper of your choice
  • Please retain a copy of your shipping receipt and tracking number

Once we receive the item, we will issue a refund to your original method of payment within 24-48 hours.

Under certain circumstances, an item will NOT be refunded. These circumstances include, but are not limited to:

  • Product has been installed or otherwise modified/used
  • Product is shipped without it's original packaging, installation hardware, or documents
  • The RMA number was not written on the outermost box

NOTE: The customer is responsible for the return shipping costs.

Shipping Policy

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, most items will ship within 1-2 business days, unless otherwise noted in the product listing. Special Orders lead times (i.e. time to ship) will be discussed over the phone with the customer.

Any orders over $99 ships free* to the contiguous 48 states (excluding Alaska and Hawaii). Orders receiving free shipping will be shipped via ground. International and  orders requiring freight shipping do NOT qualify for free shipping.

*Note: Any item requiring freight shipping does not qualify for Free Shipping. 

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). You should expect to receive your refund within 24-48 hours of us receiving your return.

NOTE: Original costs of shipping the item to you will NOT be refunded.

Please keep in mind the transit time for us to receive your return from the shipper (5 to 10 business days) and the time it takes your bank to process our refund request (5 to 10 business days).

Once we receive your return request, we will respond quickly with a status update, RMA (Return Merchandise Authorization) number, and  instructions for how to return items from your order. You may also find the instructions for returning items as follows:

  • Place, secure, and seal the item and any instructions, warranty, or other documents in its original packaging & box
  • Place the original product, within its box, inside another box
  • Use a black Sharpie, or other distinctive, bold pen, to write your RMA number on the outermost of the box (e.g. "RMA# 567)
  • Take the box to the shipper of your choice
  • Please retain a copy of your shipping receipt and tracking number

Once we receive the item, we will issue a refund to your original method of payment within 24-48 hours.

Under certain circumstances, an item will NOT be refunded. These circumstances include, but are not limited to:

  • Product has been installed or otherwise modified/used
  • Product is shipped without it's original packaging, installation hardware, or documents
  • The RMA number was not written on the outermost box

NOTE: The customer is responsible for the return shipping costs.